Upgraded from ZCM 11.4.1 to 11.4.3.
All went fine. No errors.

Now, when trying to PXE-boot a machine, I can see that it finds the correct PXE-server, it gets IP and so on.
But after that, when about to download imaging engine, the folowing error comes up.
RPM:TFTP Read failed
Complete screendump below.

I also put on November Img Update.
No prob. Upgraded Tuxera driver. Look fine.

If booting from boot-cd, it works fine. Can image machine.
I can even do a manual "tftp xxxxxxx -c get file.txt", so I can see that the TFTP service work on the server.
But no luck starting up via PXE.
Ideas?
/Stefan

Network boot from Intel E1000

CLIENT MAC ADDR: XX XX XX XX XX XX XX GUID: XXXXXXX-XXXXXXXX-XXXXXX-XXXXXXX-XXXXXXXX-XXXXXX-X
CLIENT IP: 192.168.203.47 MASK: 255.255.255.0
DHCP IP: 192.168.10.215 PROXY IP: 192.168.10.140
GATEWAY IP: 192.168.203.1

Auto-select:
Novell Preboot Server -- 192.168.10.140

Novell Preboot Execution (PXE) Agent v11.4.2
Copyright Novell Inc.
Sending Queries to 192.168.10.140
Contacting Novell Preboot Policy Service ... Done
RPM:TFTP Read failed
PXE-M0F: Exiting Intel PXE ROM