We just started implementing Zenworks Full Disk Encryption but we have some problems to get it working with Windows 10. On the same HP Pro x2 612 G1 laptop, installed with Windows 8.1 it works perfectly.
When we enable the FDE policy with PBA and SSO enabled, we get the message that we have to reboot to enable FDE. After the first reboot we see that a extra partition is created from 502 MB. When we reboot the laptop for the second time it should normally boot into the Linux partition and give you the option to boot into windows. When you boot into windows and login, the credentials are saved and the next time you boot into Linux you have to authenticate there.
With Windows 10 it is not booting into the Linux partition, but instead it is booting to Windows again. When we login to windows , it does not boot into Windows but it restarts the laptop. Next time login the same thing happens, so it is in a continious loop.
We have booted with a windows 10 usb stick and saved the log files from c:\program data\novell\zes\logs\fde. The following is what we see in the logfiles :

10:14:18, 20.03.2018 ERROR LOG: GetNACPartitionData: failed to get NAC partition data (error = -19)
10:14:18, 20.03.2018 ERROR LOG: GetNACBlockStatus: cannot get NAC partition end (error = -19)
10:14:18, 20.03.2018 INFO LOG: Detect disk type
10:14:18, 20.03.2018 INFO LOG: ***Enter function IsSBSExist***
10:14:18, 20.03.2018 ERROR LOG: SecTDCommunicate failed with error -24 !
10:14:18, 20.03.2018 ERROR LOG: GetNACPartitionData: failed to get NAC partition data (error = -19)
10:14:18, 20.03.2018 ERROR LOG: GetNACBlockStatus: cannot get NAC partition end (error = -19)
10:14:18, 20.03.2018 ERROR LOG: DALSendMessageToDriver: failed to do DeviceIoControl to disk (io_func: 0x900, error: 1)
10:14:18, 20.03.2018 ERROR LOG: HDD base: OpenDisk failed to open disk (number: 129, error: 0x2)
10:14:18, 20.03.2018 ERROR LOG: DALSendMessageToDriver: failed to open disk '129' (error: 183)
10:14:18, 20.03.2018 ERROR LOG: HDD base: OpenDisk failed to open disk (number: 130, error: 0x2)
10:14:18, 20.03.2018 ERROR LOG: DALSendMessageToDriver: failed to open disk '130' (error: 183)
10:14:18, 20.03.2018 ERROR LOG: GetNACPartitionData: failed to get NAC partition data (error = -19)
10:14:18, 20.03.2018 ERROR LOG: GetNACBlockStatus: cannot get NAC partition end (error = -19)
10:14:18, 20.03.2018 ERROR LOG: DALSendMessageToDriver: failed to do DeviceIoControl to disk (io_func: 0x900, error: 1)

It seems to us it cannot boot from the Linux partition. We have tried different DMI settings but without any result.
Any suggestions what we can do to solve this problem ?