Quote Originally Posted by CRAIGDWILSON View Post
Maybe a newer version of WinPE (1809 should be out now....)
Those drives may need a particular driver......
Could be a Firmware Update...
Yeah I'm using 1809, even tried going back to 1803 and 1709 with no difference. This was before I realised something...

With the 220 units of each model (440 total), I was testing with the two demo units that I originally received from Dell and HP, assuming they were identical to fleet we received. Turns out that all of the Dell 3380's have Toshiba SSDs and all of the HP 430's have Sandisk SSDs which image fine. But, the demo Dell 3380 has a Hynix SSD and the demo HP 430 has a Samsung SSD which will not image. Go figure...

I'll revisit looking for drivers for these two problem children later down the track should I find the time, but for now I'll leave it as I'm no longer in hot water.

Cheers!


For reference, I'm imaging with ZCM 17.3 using WinPE (1809) imaging. The two SSDs that were giving me problems were:

Samsung MZ-NTY2560 256GB M.2
SK Hynix SC311 256GB SATA